Go Bottom Go Bottom

chipper on BX 1500

View my Photos
tsatter
Join Date: Oct 2003
Posts: 1 Catskill NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-10          82687

drchipper has a new wood chipper with 3pt hitch for compacts up to 45 hp. will BX 1500 handle it?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



chipper on BX 1500

View my Photos
itsgottobegreen
Join Date: Oct 2003
Posts: 329 Mt. Airy, MD
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-04-10          82689

I think you might run into pto hp problems. I don't know what the 1500 pto hp is and what the Dr really needs. A might mac chipper/shreader who do the same job, but not tie up the tractor ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



chipper on BX 1500

View my Photos
bikingdds
Join Date: Nov 2003
Posts: 1 MD
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-11          82743

A Salsco model 600 is one of the chippers I found on the web while looking for one for my bx1500, requiring only 8hp. Has anyone used one? ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



chipper on BX 1500

View my Photos
texbaylea
Join Date: Feb 2004
Posts: 51 Brazos County, Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2004-04-12          82905

I have used a Woods 5000 is is specified as 15-35 hp if I remember correctly on a B6100E with a 12 hp net PTO. Worked fine if I fed a little bit slowly and limited limbs to not much more than 3". I believe that the net PTO hp on your BX1500 is greater than that. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



chipper on BX 1500

View my Photos
jarndt
Join Date: Dec 2003
Posts: 351 Northern Virginia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2004-04-13          82918

The PTO hp on a BX1500 is listed at 10.6, however if you were careful not to overload the engine, you could probably use implements rated up to 15 hp. Just keep in mind that the engineers at Kubota have good reasons behind their numbers. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login